Filters & Pumps

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we...

Threaded plastic plug fits the Priming Port and Drain Port of both our PMP100 Centrifugal Pump as well as the pump on our 20x209cm Plate and Frame Filters. Item #...

Pump bypasses reduce a pump's outlet pressure by providing an alternate flow path for the fluid being pumped. When the fluid encounters backpressure downstream, it can recirculate through the bypass...

Straight barb for pump, 3/8 inch NPT x 3/8 inch barb. Item # FIL04 Weight 0.01 LBS

Complete internal gasket set to rebuild our PMP100 pump. Does not include the impeller. Item # PMP100B Weight 0.20 LBS

Replacement O-ring for Euro 20 pump. In documents tab: Position: 2 Item # PMPP520O Weight 1 LBS

The high-flow (HF) model comes with all the great features of the original March pump - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade...

High-Flow March Pump assembly, complete with fittings. Threading stainless steel onto plastic can be somewhat tricky, so we send this unit out completely assembled for you! We mount a stainless...

Designed for the small 'Nano' commercial brewery where the H315 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery...

Wrench for opening prefilter on Super Transfer Pump (H308) Item # H308W Weight 0.50 LBS

Replacement Screen for FIL26 and FIL27 pre-screen filters. California Recipients: WARNING: Cancer - www.P65Warnings.ca.gov   Item # FIL26A Weight 0.04 LBS

Inline mesh screen filter to pre filter liquids before passing through a pump. Will remove large particles and protect the pump mechanisms from contaminants. Features 3/4 inch barbs on the...

Set of Body Seal, Mechanical Seal and O-Ring needed to completely rebuild the pump head. We recommend changing these out at the same time you change your impeller (PMP125A). Item...

Replacement gasket for our nano brewery pumps. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov   Item # H329 Weight 0.25 LBS

This is the complete wet-end assembly for the Chugger Brew Pump. Stainless steel construction means that this is going to be the last head you buy for your pump. If...

Same polysulfone pump housing as our H315, but featuring a 230V motor for customers from Europe, Australia, New Zealand, etc. Does not come with the 6' cord or the built-in...

Replacement rubber impeller for our PMP125 and PMP150 pumps. Item # PMP125A Weight 0.36 LBS

Replacement head Oring for Euro 30 pump.  This O-Ring is slightly larger than the Body O-Ring. In documents tab: Position: 13 EnoItalia Item #: G8025 Item # PMPP530HO Weight 1...

The X-Dry Series Chugger Pumps offer the same quality and value, but now with "Run Dry Protection" to help avoid damage caused by cavitation. The Chugger lineup of pumps represents...

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we...

Replacement diaphragm for 4.9 GPM Flojet pump. California Recipients: WARNING: Cancer - www.P65Warnings.ca.gov   Item # FIL06C Weight 1 LBS

Our own stainless mounting bracket allows you to slide in one of our March pumps for easy control of pump. Has two pre-drilled holes for attaching to brewing stand, cart,...

Replacement diaphragm for 1.6 GPM Flojet pump. Item # FIL09A Weight 0.08 LBS

Quick disconnect barb set (2 pieces) for 4.9 GPM Flojet pump. Item # FIL06A Weight 0.09 LBS

Diaphragm Pump, self priming. 3/4" barbed fittings. Pump is not wired, it requires a plug and/or switch with cord to operate. 4.5 gpm. 140° F max temperature. California Recipients: WARNING:...

A replacement pump head for the H308 diaphragm pump, should the diaphragms become worn or get damaged by passing particulate matter through them. Please Note: This pump head does not...

A replacement head that fits either the H315 or H315HF Polysulphone pump. This is only the plastic head, no impeller. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov  ...

A Stainless Steel pump housing is food-grade and nearly indestructable. Exact same internal pump as our H315 but with a stainless steel housing. Stainless steel is the material of choice...

Replacement impeller for our H325, H327 & H328 March Nano Pumps. Item # H325I Weight 0.01 LBS

The ultimate pump for home winemaking use. Self-priming (will push air) so that it can draw out of a tank. Gentle diaphram action so as to not "beat up" the...

This white plastic swivel fitting is made by Shurflo, manufacturers of our popular H305 Self Priming Diaphragm pump, and is designed specifically to fit with this pump. Features a 1/2"...

This is a submersible pump that can be easily added into your glycol chiller or ice bank. It has a small, compact design but can still push up to 1300...

The X-Dry Series Chugger Pumps offer the same quality and value, but now with "Run Dry Protection" to help avoid damage caused by cavitation. The Chugger lineup of pumps represents...

This is a submersible pump is perfect for use with a glycol chiller or icebank. It has a small, compact design but can still push up to 800 gallons per...

Variable speed diaphragm pump. This pump is ideal for moving small quantities of wine, beer, and other liquids. Diaphragm pumps are self priming, so they can suck the liquid directly...

Stainless Steel pump head updgrade for the MKII pump, sku PMP500. With the pump (that inlcudes standard polysulphone head) and this stainless head you are still looking at a retail...

An amazing little pump from "down under". It has been used in the Australian market for years where it has a good reputation. Works like a March or a Chugger...

40cm x 40cm filter pads made for 40x40 plate filters. 9-10 micron pads are considered to be a "very rough" filtration and are typically used to prepare the wine to...

40cm x 40cm filter pads made for 40x40 plate filters. Pads rated 0.45 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility...

40cm x 40cm filter pads made for 40x40 plate filters. 1.5 micron pads are for fine polishing of the wine, or for preparing wines to go through a sterile cartridge...

40cm x 40cm filter pads made for 40x40 plate filters. 5-7 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be...

40cm x 40cm filter pads made for 40x40 plate filters. 0.8 micron pads are for ultra-fine polishing of the wine, or for preparing hard to filter wines to go through...

40cm x 40cm filter pads made for 40x40 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that...

For use with our FIL45 series of plate filters. These pads will provide between .3 - .5 Micron filtration. This pad is the right choice when you want to promote...

For use with our FIL45 series of plate filters. These pads will provide between 5-7 Micron filtration. Each filter pad set is good for approximately 5 gallons of beer. These...

For use with our FIL45 series of plate filters. These pads will provide between 1-2 Micron filtration. Each filter pad set is good for approximately 5 gallons of beer when...

Genuine Buon Vino Super Jet Filter Pads. #3 0.5 micron nominal filter pads are used for sterile filtration. They are very tight pads that remove very small particulate in your...

Genuine Buon Vino Super Jet Filter Pads. #1 8.0 micron nominal filter pads are used for coarse filtration. They remove large particles in heavy wines, typically big reds. Wine should...

Genuine Buon Vino Super Jet Filter Pads. #2 2.0 micron nominal filter pads are used for fine or polishing filtration. Use to remove medium to small particulate and add shine...

Remove chlorine and organic flavor with this 10" carbon block filter. Also filters out sediment to 10 micron. We open the housing after use and store filter dry to eliminate...

Replacement End Plate for your 40x40cm Plate & Frame filter.   California Recipients: WARNING: Birth Defects - www.P65Warnings.ca.gov   Item # WE912F Weight 1 LBS

Spare/Replacement gasket for 40x40 cm plate and frame filters. For use with the center plates. This gasket fits our OMAC brand filters, and may not fit filters from other manufacturers....

Replacement End Plate for your 20x20cm Plate & Frame filter California Recipients: WARNING: Birth Defects - www.P65Warnings.ca.gov   Item # WE912C Weight 2 LBS

Replacement Y connector for our FIL45B Plate filter. Item # FIL45Y Weight 0.10 LBS

Replacement foot for the Buon Vino Super Jet Filter (FIL10) Item # FIL10F Weight 0.04 LBS

Individual Noryl plates, 20cm x 20cm, for adding to one of our existing plate filters. Each filter we sell lists the maximum number of plates that the filter can contain....

Replacement gasket for 20x20 filters. This is a middle gasket (thicker) not an end gasket (which is thinner) Please note these are only for our filters and will not work...

Most breweries and wineries use a large plate filter system to achieve clear product. Now you can do the same at home with two corny kegs. Our Beer and Wine...

Developed for home wine makers who make 40 gallons plus per year from grapes, berries or fresh juice, the Super Jet filters approximately 71 gallons/hour, producig a professional-level brilliance and...

Perfect accessory for the 10" filter housing. Mount your water or beer filter assembly to a wall with this bracket. Screws not included. Customers will need, 1/2" Long, 1/8" Wide,...

Inline mesh screen filter to pre filter liquids before passing through a pump. Will remove large particles and protect the pump mechanisms from contaminants. Features 1/2 inch barbs on the...

"O"- ring for 10" Water Filter Housing FIL32a Item # FIL32B Weight 0.01 LBS

Our Plate Filter has a larger surface area, which means more yeast and particulate extraction. Each filtering session requires two pads at a time, and each pad must be the...

The Buon Vino Mini Jet has been designed with the small quantity winemaker in mind. It is the perfect way for the home hobbyist to produce a wine with a...

This water filter kit features a 10" carbon block filter that removes all chlorine and organic flavor. Kit includes 10" housing, one carbon block filter, garden hose attachment, barbed fittings...

An inline sanitary filter that filters down to .027 micron with a 99.99% efficiency. Use it anywhere you need to keep something sanitary. Both 1/4" and 3/8" tubing will attach...

Install inline between two ball lock Cornelius kegs using CO2 pressure to push the beer out of the full keg through the filter and into the clean keg. This kit...