Foam on Beer Detectors, or FOBs, are commonly used in commercial draft systems as a way to eliminate product waste and increase profits. When a keg completely empties and foam passes into the FOB it will shut off flow and in doing so keep the draft line completely full of beer until a new keg is tapped. This means you can hook a fresh keg and continue pouring without foaming issues, preventing you from wasting beer that is otherwise needed to refill the line and purge the system.

The FOB comes with 3/8" Duotight compatible barbs at the inlet and outlet, allowing you to easily hook up EVABarrier tubing with either a 9.5 mm joiner or 9.5 mm to 8 mm reducer (DUO113 / DUO105). If not using EVABarrier, simply clamp the line directly onto the barb.

Setup and Use:

Attach beverage line from outlet of keg coupler to straight inlet of FOB.
Attach beverage line from elbow outlet of FOB to faucet shank.
Connect fresh keg and push down purge button until the chamber fills with beer.
Push bottom knob in to lift float then pull out for normal operation.

Kegland Part number: KL00802

Item #	D1570

Weight	2 LBS

Foam on Beer Detector (FOB)