Brewing Equipment

Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The...

3/8 in Stainless Steel Blowoff Cane Specifications: Stainless steel 3/8 in inner diameter 18 in Tall x 7 in Wide Item # FE520 Weight 0.06 LBS

1/2 in Stainless Steel Blowoff Cane Specifications: Stainless steel 1/2 in outer diameter 7/16 in inner diameter (approximately) 19 in Tall x 7.5 in Wide Item # FE521 Weight 1...

Food-Grade Propylene Glycol USP for use in Glycol Cooling Systems in any Food Service application. Dilute with distilled water to the ratio specified in the instructions for your chiller. PLEASE...

Analog temperature controllers are used to maintain a refrigerator at a precise, pre-set temperature. Our temperature controllers are sturdy and easy to use. Simply plug your refrigerator into the temperature...

Johnson Controller - Replacement Temperature Sensor. 6.5 ft. length. For use with Digital Controller only, not Analog. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov   Item # FE611B...

After trying a number of designs from overseas, none of which fit our probes properly, we created our own! Made in the USA, this Threaded Shielded Thermowell is designed to...

Plastic temperature probe bulkhead. Note: Do not exceed temperatures of 221 F (105 C). Does not come with probe. Kegland Part Number: KL01939 Item # MT385 Weight 0.04 LBS

This cable connects a 230 v solenoid valve to its controller.  Use with a kreyer fan unit, solenoid valve, and control unit to choose a specific temperature set point for...

If your glycol system is positioned below the level of your jackets, heat exchangers or piping system, you may get back flow into the chiller's reservoir when the solenoid valves...

This small filter should be used inline before a 1/2 in. solenoid valve to protect it from damage from particulates. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov  ...

Replacement Temperature Sensor for Kreyer Chilly 45, Chilly Max, and MCK units. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov   Item # GLYP410TS Weight 0.10 LBS

 Our hanger screws into a vertical surface and allows you to hang your Ranco controller. The hanger bracket features two posts that fit the mounting holes that are a part...

Ideal for 5 gallon size batches Item # BE490 Weight 0.25 LBS

Plastic funnel, top measures 12 cm (4-3/4 in) wide. Does not accept a filter screen. Item # BE476 Weight 0.09 LBS

Plastic funnel, top measures 25 cm (10 in) wide. Has a groove at the base of the funnel to accept a filter screen. Item # BE489 Weight 0.45 LBS

Plastic funnel, top measures 25 cm (10 in) wide. One side is extended so that when you pour into the funnel the liquid can not back up over the side...

Plastic funnel, top measures 15 cm (6 in) wide. Does not accept a filter screen. Item # BE477 Weight 0.13 LBS

A great funnel for small jobs. This will fit into the necks of most beer and wine bottles, allowing for individual filling. Also works well to fill 2L PET bottles...

Has a larger diameter opening than the 8" funnel which allows for faster pouring. When using the funnel to pour wort into a 5, 6, or 6.5 gallon carboy, you...

This cover is custom designed for The Catalyst Fermentation System using thick 600D vinyl laminated canvas that blocks out 100% of UV light to ensure your beer is protected. Integrated...

Plastic funnel, top measures 35 cm (13-3/4 in) wide. Has a groove at the base of the funnel to accept a filter screen. Item # BE478 Weight 0.76 LBS

Plastic funnel, top measures 40 cm (15-3/4 in) wide. Has internal groove to accept filter screen (BE488).  Item # BE479 Weight 1 LBS

5L narrow mouth demijohn plastic dust cap Item # FE290A Weight 0.00 LBS

34L narrow mouth demijohn plastic dust cap Item # FE294A Weight 0.01 LBS

Install inline between two ball lock Cornelius kegs using CO2 pressure to push the beer out of the full keg through the filter and into the clean keg. This kit...

An inline sanitary filter that filters down to .027 micron with a 99.99% efficiency. Use it anywhere you need to keep something sanitary. Both 1/4" and 3/8" tubing will attach...

This water filter kit features a 10" carbon block filter that removes all chlorine and organic flavor. Kit includes 10" housing, one carbon block filter, garden hose attachment, barbed fittings...

The Buon Vino Mini Jet has been designed with the small quantity winemaker in mind. It is the perfect way for the home hobbyist to produce a wine with a...

Our Plate Filter has a larger surface area, which means more yeast and particulate extraction. Each filtering session requires two pads at a time, and each pad must be the...

"O"- ring for 10" Water Filter Housing FIL32a Item # FIL32B Weight 0.01 LBS

Inline mesh screen filter to pre filter liquids before passing through a pump. Will remove large particles and protect the pump mechanisms from contaminants. Features 1/2 inch barbs on the...

Perfect accessory for the 10" filter housing. Mount your water or beer filter assembly to a wall with this bracket. Screws not included. Customers will need, 1/2" Long, 1/8" Wide,...

Developed for home wine makers who make 40 gallons plus per year from grapes, berries or fresh juice, the Super Jet filters approximately 71 gallons/hour, producig a professional-level brilliance and...

Most breweries and wineries use a large plate filter system to achieve clear product. Now you can do the same at home with two corny kegs. Our Beer and Wine...

Replacement gasket for 20x20 filters. This is a middle gasket (thicker) not an end gasket (which is thinner) Please note these are only for our filters and will not work...

Individual Noryl plates, 20cm x 20cm, for adding to one of our existing plate filters. Each filter we sell lists the maximum number of plates that the filter can contain....

Replacement foot for the Buon Vino Super Jet Filter (FIL10) Item # FIL10F Weight 0.04 LBS

Replacement Y connector for our FIL45B Plate filter. Item # FIL45Y Weight 0.10 LBS

Replacement End Plate for your 20x20cm Plate & Frame filter California Recipients: WARNING: Birth Defects - www.P65Warnings.ca.gov   Item # WE912C Weight 2 LBS

Spare/Replacement gasket for 40x40 cm plate and frame filters. For use with the center plates. This gasket fits our OMAC brand filters, and may not fit filters from other manufacturers....

Replacement End Plate for your 40x40cm Plate & Frame filter.   California Recipients: WARNING: Birth Defects - www.P65Warnings.ca.gov   Item # WE912F Weight 1 LBS

Remove chlorine and organic flavor with this 10" carbon block filter. Also filters out sediment to 10 micron. We open the housing after use and store filter dry to eliminate...

Genuine Buon Vino Super Jet Filter Pads. #2 2.0 micron nominal filter pads are used for fine or polishing filtration. Use to remove medium to small particulate and add shine...