Brewing Equipment

Clamp - Double Burette Holder. Double buret clamp securely holds up to two burets without obscuring graduation lines or numbers. Item # MT101 Weight 0.30 LBS

Use this handy torch during yeast management or to make creme brulee. This unit has all the features you look for in a hand torch, including a safety, variable heat...

Support Stand For SO2 Kit Item # MT100 Weight 1 LBS

Includes 4oz each of 4.00 and 7.00 buffers. We package these solutions from bulk quantities to get you the best pricing. For testing, pour buffers into a small glass. You...

pH indicator strips in the range of 4.6 - 6.2 pH, the ranges typically seen in brewing. The vial contains 100 strips, and a color reference chart for determining the...

7.00 can also be used for storage when pH storage solution is not available. Expires after 6 months if unopened. Expires after 3 months if opened. Item # MT614 Weight...

Expires after 6 months if unopened. Expires after 3 months if opened. California Recipients: WARNING: Cancer - www.P65Warnings.ca.gov   Item # MT612 Weight 0.16 LBS

For long term health of your elctrode use pH storage solution. It is a mixture of Potassium Chloride, Postassium Hydrogen Phthalate, Silver Nitrate, and Sodium Hydroxide.   Volume: 230 ml...

It is very important to keep your pH meter probe from drying out as this is the leading cause of degradation. Make sure to always fill the cap with storage...

A replacement electrode for Milwaukee PH Meters. The electrode is the consumable portion of the pH meter which actually makes the measurement. All pH electrodes wear out over time and...

Standardized buffer solution for calibration of pH meters. 7.00 standard buffer is typically used as an initial calibration point for most pH meters. Item # MT614G Weight 9 LBS

Standardized buffer solution for calibration of pH meters. 4.00 standard buffer is often used as a 2nd calibration point when calibrating meters to read beer and wine pH levels. California...

Covers the pH range from 3 to 6 in half degree increments. Good for checking pH of meads and ok for mashing. 12 strips per package. Item # MT628 Weight...

Covers the pH range of 4 to 9 in one degree increments. Great for checking water and pretty good for mashing. 15' of paper. Item # MT630 Weight 0.06 LBS...

A replacement electrode for the Hanna pHep 4 or pHep 5 pH meter. The electrode is the consumable portion of the pH meter which actually makes the measurement. All pH...

Test the pH of your beer or wine with confidence using our colorpHast pH strips. These strips are high-quality and are made not to run, so you are assured of...

Anvil Brewing Equipment high precision digital scale has a 4” X 4” stainless steel weighing surface and a capacity of 4.4lb (2 KG) and a precision of 0.005 oz. (0.1g)!...

The perfect scale for those measurements of 1000 grams or less. With a readability and accuracy of 0.1 grams, you are sure to get a precise measurement every time. This...

Power Adapter for MT355 Scale   Input: 120V at 60Hz Output: 9V DC at 300mA California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov   Item # MT355AD Weight 0.38...

Anvil Brewing Equipment high capacity digital grain scale handles up to 65lb with 0.02lb accuracy! The huge 12.5” X 11.75” stainless steel weighing surface is big enough to support about...

The Primo digital scale is great for weighing out grains, hops, and other additions for brewing and winemaking. They are economically priced, and very easy to use with a 2-button...

The Pico digital scale is great for measuring out small amounts of hops or chemicals for winemaking, brewing, and other uses. It has the same capacity as the "Primo" scale,...

Compact digital scale with 1 kg capacity and 1 g resolution. Reads in both grams and ounces. Perfect for measuring hops, specialty malts, DME, brewing salts, cleaning powders, or anything...

Never need batteries again for your High Precision Series Scale. For the American Weigh product AMW LB-501, our MT353. Input: 120V at 60Hz Output: 9V DC at 100mA Item #...

This is a 120V adapter for MT359S. Item # MT359V Weight 1 LBS

Used to determine the Total Acidity in a wine, the CellarScience Acid Test Kit is an invaluable tool for any home winemaker. Total Acidity measurements are important to winemaking because the correct...

The BrewLab Basic® water testing kit, model 7189-02, for home brewers quantifies 6 important water test factors. Experts agree water conditions affect your final product, so take the mystery out of...

Titrets testers for monitoring Free SO2 levels in wines. The Sulfite in Wine Titrets test is based on the �Ripper� chemistry which employs an iodide-iodate titrant in an acid solution...

Replacement Calcium Hardness Indicator Tablets (T-5250-H) for the Lamotte Water Test Kit (7189-01).  Item # MT200D Weight 0.07 LBS

A 1oz bottle of 0.01N Hydrochloric Acid, used in our MT140Home SO2 Test Kit. Store in a cool, dry place. 3-4 month shelf life at room temp once opened. Can...

Replacement Hardness test reagent 5 (15 ml) with a 12 month shelf life Does not include complete BrewLab test kit.   See BrewLab Basic® test kit or BrewLab Plus test kit for additional information....

Replacement Total Alkalinity Indicator test reagent (15 ml) with a 6 month shelf life Does not include complete BrewLab test kit.   See BrewLab Basic® test kit or BrewLab Plus test...

  Accurate & Affordable Free SO2 Testing! In winemaking, Sulfur Dioxide (SO2) is one of the most important and effective tools in the winemaker's arsenal for protecting against the effects of...

Refill solvent for our Chromatography kit. 250ml. Contains n-butanol, formic acid and bromocresol green. Should be used in well ventilated area. Item # MT931 Weight 0.50 LBS

A handy addition to any Home Lab, this wash bottle is great for cleaning out pipettes after use, rinsing pH electrodes and cleaning out components of your Aeration/Oxidation set. Also...

Capillary Tubes for Chromatography Kits Item # MT933 Weight 0.10 LBS

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we...

Replacement Silver Nitrate - 0.171N (3824WT-G) for the Lamotte Water Test Kit (7189-01).  Item # MT200L Weight 0.12 LBS

Replacement jar of phenolphthalein indicator for the W501 Acid Test Kit. This phenolphthalein is suitable for acid test kits from other suppliers as well. Phenolphthalein will often turn colorless in...

This is the indicator added to the Hydrogen Peroxide in an Aeration-Oxidation Free SO2 Test. Use 3-6 drops per test, store capped in a cool, dry place. 1 oz container....

Refill for Chromotagraphy kit. 25 Sheets. Item # MT932 Weight 0.50 LBS