Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we...
Threaded plastic plug fits the Priming Port and Drain Port of both our PMP100 Centrifugal Pump as well as the pump on our 20x209cm Plate and Frame Filters. Item #...
Pump bypasses reduce a pump's outlet pressure by providing an alternate flow path for the fluid being pumped. When the fluid encounters backpressure downstream, it can recirculate through the bypass...
The high-flow (HF) model comes with all the great features of the original March pump - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade...
High-Flow March Pump assembly, complete with fittings. Threading stainless steel onto plastic can be somewhat tricky, so we send this unit out completely assembled for you! We mount a stainless...
Designed for the small 'Nano' commercial brewery where the H315 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery...
Replacement Screen for FIL26 and FIL27 pre-screen filters.
California Recipients: WARNING: Cancer - www.P65Warnings.ca.gov
Item #
FIL26A
Weight
0.04
LBS
Inline mesh screen filter to pre filter liquids before passing through a pump. Will remove large particles and protect the pump mechanisms from contaminants. Features 3/4 inch barbs on the...
Set of Body Seal, Mechanical Seal and O-Ring needed to completely rebuild the pump head. We recommend changing these out at the same time you change your impeller (PMP125A). Item...
This is the complete wet-end assembly for the Chugger Brew Pump. Stainless steel construction means that this is going to be the last head you buy for your pump. If...
Same polysulfone pump housing as our H315, but featuring a 230V motor for customers from Europe, Australia, New Zealand, etc. Does not come with the 6' cord or the built-in...
Replacement head Oring for Euro 30 pump. This O-Ring is slightly larger than the Body O-Ring. In documents tab: Position: 13 EnoItalia Item #: G8025 Item # PMPP530HO Weight 1...
The X-Dry Series Chugger Pumps offer the same quality and value, but now with "Run Dry Protection" to help avoid damage caused by cavitation. The Chugger lineup of pumps represents...
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we...
Our own stainless mounting bracket allows you to slide in one of our March pumps for easy control of pump. Has two pre-drilled holes for attaching to brewing stand, cart,...
Diaphragm Pump, self priming. 3/4" barbed fittings. Pump is not wired, it requires a plug and/or switch with cord to operate. 4.5 gpm. 140° F max temperature. California Recipients: WARNING:...
A replacement pump head for the H308 diaphragm pump, should the diaphragms become worn or get damaged by passing particulate matter through them. Please Note: This pump head does not...
A replacement head that fits either the H315 or H315HF Polysulphone pump. This is only the plastic head, no impeller. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ...
A Stainless Steel pump housing is food-grade and nearly indestructable. Exact same internal pump as our H315 but with a stainless steel housing. Stainless steel is the material of choice...
The ultimate pump for home winemaking use. Self-priming (will push air) so that it can draw out of a tank. Gentle diaphram action so as to not "beat up" the...
This white plastic swivel fitting is made by Shurflo, manufacturers of our popular H305 Self Priming Diaphragm pump, and is designed specifically to fit with this pump. Features a 1/2"...
This is a submersible pump that can be easily added into your glycol chiller or ice bank. It has a small, compact design but can still push up to 1300...
The X-Dry Series Chugger Pumps offer the same quality and value, but now with "Run Dry Protection" to help avoid damage caused by cavitation. The Chugger lineup of pumps represents...
This is a submersible pump is perfect for use with a glycol chiller or icebank. It has a small, compact design but can still push up to 800 gallons per...
Variable speed diaphragm pump. This pump is ideal for moving small quantities of wine, beer, and other liquids. Diaphragm pumps are self priming, so they can suck the liquid directly...
Stainless Steel pump head updgrade for the MKII pump, sku PMP500. With the pump (that inlcudes standard polysulphone head) and this stainless head you are still looking at a retail...
An amazing little pump from "down under". It has been used in the Australian market for years where it has a good reputation. Works like a March or a Chugger...
40cm x 40cm filter pads made for 40x40 plate filters. 9-10 micron pads are considered to be a "very rough" filtration and are typically used to prepare the wine to...
40cm x 40cm filter pads made for 40x40 plate filters. Pads rated 0.45 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility...
40cm x 40cm filter pads made for 40x40 plate filters. 1.5 micron pads are for fine polishing of the wine, or for preparing wines to go through a sterile cartridge...
40cm x 40cm filter pads made for 40x40 plate filters. 5-7 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be...
20cm x 20cm filter pads made for 20x20 plate filters. 9-10 micron pads are considered to be a "very rough" filtration and are typically used to prepare the wine to...
20cm x 20cm filter pads made for 20x20 plate filters. 1.5 micron pads are for fine polishing of the wine, or for preparing wines to go through a sterile cartridge...
40cm x 40cm filter pads made for 40x40 plate filters. 0.8 micron pads are for ultra-fine polishing of the wine, or for preparing hard to filter wines to go through...