Keg System Components

Quick disconnect fitting features a 1/4 inch barb on one side, and a female quick disconnect fitting on the other side. Integral shutoff seals the valve when not connected to...

So you had the great foresight to buy our modular gas line manifold and now you are adding a keg. You need gas on that keg. No problem, use our...

Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when...

Threaded for insertion into a regulator, this unique valve is a ball valve and check valve all in one. Offers you the flexibility to quickly turn off CO2 and at...

Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when...

CO2 Injector has 1/4" female flare thread opening. Uses 16g Cartridges. Does not come with quick disconnect. Caution the cartridges contain liquid co2 that will dispense at over 600PSI. With...

Gas Manifold Parts - 1/4" Nipple For expanding a gas manifold.. Right Hand Thread California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov   Item # D1820B Weight 0.10 LBS...

Replacement low pressure gauge for CO2 or Nitrogen regulator - used to determine how much pressure you're allowing out of the regulator. RHT California Recipients: WARNING: Cancer and Reproductive Harm...

Simple Tee's that work great with 5/16" ID tubing. Made in the USA by Kent. California Recipients: WARNING: Reproductive Harm - www.P65Warnings.ca.gov   Item # D1840 Weight 0.03 LBS

18 gram disposable Nitrogen cartridge for use with our mini CO2 regulators, KEG960, KEG965A. Often used to push wine, mixed drinks, coffee, or any other liquid where you do not...

Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when...

Insert in a gas line and you will be able to shut off gas flow anytime. Has internal check flow valve that prevents liquid from traveling past, even when the...

Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg.Notes: You need to wind/unwind the end of the valve to adjust the...

A portable method of dispensing your kegs on the go. No longer do you have to lug around your heavy, unbalanced CO2 tank. This hand held CO2 unit pushes out...

This spunding valve is a great accessory to have when performing pressure transfers and is a must-have for fermenting under pressure. Made from stainless steel components for long-lasting quality. Features...

The mini-reg features total portability with all the features of a full size regulator. The regulator has a range of .5-1.5 bars which equates to 7-21 p.s.i.. This means that...

Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows...

These quick disconnects feature 3/8" barbed fittings which can be used with 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F...

26 gram disposable Argon cartridge for use with our mini CO2 regulators, KEG960, KEG965A. Often used to push wine, mixed drinks, coffee, or any other liquid where you do not...

O Ring for Beer & Gas Line QD (for H550A) Item # H550G Weight 0.01 LBS Connection N/A Size N/A Material N/A Use Quick Disconnect

CO2 injector assembly for Pin Lock Kegs. Uses non-theaded 16g co2 cartridges. Shipping Restricted: This product is only eligible for ground shipment within the contiguous 48 states.   C02 Warning:...

The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and...

Metal protection cage for CO2 and gas regulators. Using the 3 stainless steel screws provided, tighten the 2 sides of the cage around your regulator to protect it from bumps...

The patented Stainless Steel Intertap Faucet is a forward sealing faucet similar to the Perlicks. It has a modular, threaded spout which can fit a variety of different attachments including...

This handy adapter fits on standard keg couplers with its female beer thread and allows a ball lock connection on the beer side of the coupler. Made from 304 stainless...

This handy adapter fits on standard keg couplers with its female beer thread and allows a ball lock connection on the gas side of the coupler. Made from 304 stainless...

The Intertap faucet is a forward sealing faucet similar to the Perlicks. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler...

Black plastic picnic taps with barb for 1/4 inch ID beer line. Also known as Cobra taps, or hand taps. Kegland Part number: KL00963 Item # D1260 Weight 0.10 LBS

D-Style sanke keg beer tap. The most frequently used keg coupler in America for draft beer dispensing. Comes with pressure relief valve. High quality construction to stand up to the...

Turn your Intertap faucet into a self-closing faucet with the use of this faucet spring. Forces the tap handle back to the closed position when you let go. This spring...

Easily attaches to any Intertap faucet. Just unscrew the standard spout and replace it with this growler spout. Then you'll have a 1/2" (13mm) barb on the end of your...

Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that...

Standard black plastic faucet handle for draft systems. Item # D1250 Weight 0.06 LBS

Short tower shank. Pack quantity: 20 per small box. 200 pieces master pack quantity (10 boxes of 20). Kegland Part number: KL01090 California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov...

1/4 inch female flare (FFL) and 5/16 inch barbed nipple combination set. Use to connect commercial size 5/16 inch ID tubing to a 1/4 inch male flare (MFL) fitting, such...

For installing and removing a faucet from a shank for cleaning. We encourage everyone who buys a faucet to buy a draft tool like this. Item # D1265 Weight 0.06...

For removing the valve and spear on American Sanke kegs. This tool will push the spear down, it does not remove the ring. Item # KEG860 Weight 4 LBS

1/4 inch barbed nipple for beer shanks, keg couplers, etc. 1/4 inch barbs are typically used with homebrew systems running 3/16 and 1/4 inch inside diameter (ID) tubing. Made from...

Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16" nipple. Requires a 1" hole saw for installation. Due to the length of the back...

Industry standard faucet for draft beer that fits North American shanks and towers. Chrome plating looks sharp and will keep your bar or kegerator looking amazing. Brass body with quick...

Simple growler filler attachment for standard faucets. Simply push in the fitting to the faucet, add some 3/8 in. tubing, and fill your growler. This only fits Intertap faucets. Faucet...

An Intertap accessory that converts the spout of an Intertap faucet into a ball lock quick disconnect. One of the most popular uses is being able to connect the beverage...

This is a rather simple, but extremely effective way to fill growlers from your draft system! Going to a party, but don't want to bring a keg of homebrew? Filling...

Replacement gaskets and o-rings for the Intertap stainless steel (SS) and plated chrome (PC) style faucets. Does not work with Intertap Flow Control (FC) faucets. Materials for the black o-rings...