Keg System Components

Beer faucet cap for keeping out fruit flies. Made from black rubber.  Item # CE93 Weight 0.02 LBS

Includes ball lock beverage-out quick disconnect (barb), 5 ft of 3/16" tubing, hand held faucet, and two hose clamps.   California Recipients: WARNING: Birth Defects and Reproductive Harm - www.P65Warnings.ca.gov...

Chrome plated brass nut, these are used on the back of beer shanks, on keg couplers, and multiple other draft serving functions.   Standard female beer thread 5/8" Top port...

This is the faucet adapter by itself. Use this faucet adapter to connect a draft faucet directly to a keg using a flare quick disconnect, KEG720 for ball lock or...

Perfect addition when purchasing a new sanke style keg coupler or tap. New taps typically come with the correct fittings for your gas line but not your beverage line. These...

1/4 inch barbed nipple for use with 1/4 inch female flare nut (KEG020). This part is the barb only, the nut must be purchased separately. Made of stainless steel. Item...

Replacement check valve with integrated washer for the gas-in fitting on Sanke couplers. Item # D1505A Weight 0.06 LBS

This fan kit blows cold air up your tower from your refrigerator to keep your tower cool whenever you pour a pint. Kit Includes: Fan box 12V power pack Flexible...

Stainless Steel Faucet Shank Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple Installation...

Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar,...

Stainless steel wrap around drip tray Dimensions: 7 in wide x 12 in long x 0.75 in deep (up to 4.33 in tower diameter) Kegland Part number: KL01427 Item # D1426 Weight...

This low profile elbow features male and female beer thread. Compatible with any standard keg coupler or beer faucet shank. Kegland Part number: KL00390 Item # D1514 Weight 0.44 LBS

Standard stainless steel spout replacement for intertap faucets Item # D1216 Weight 0.08 LBS

For taking body connects off your kegs when cleaning and replacing o-rings on kegs with 7/8" body connects. Will fit the 12 point (star pattern) body connects as well as...

Stainless Steel Faucet Shank Dimensions: 3-3/4" - Total Length (Tip to Tip) 2-1/8" - Shank Length (Without Nut & Nipple) 1-1/4" - Thread Length 11/16" - Pass Through Length Installation note:...

Replacement Top Cap for Stainless Tower Item # D1326A Weight 0.20 LBS

Blackboard and Whiteboard LED faucet handle. Comes with lithium ion battery and charger to light up tap handle. Also includes counter that counts the number of pours from the handle....

The NUKATAP beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so...

Angles large tap handles away from wall or refrigerator. Installs in between faucet lever and tap handle. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov   Item # D1270...

This is the small compression grommet that slips onto the gooseneck and seals it to the back of the shank inside a tower. Item # D1391 Weight 0.03 LBS

For taking body connects off your kegs when cleaning and replacing o-rings on kegs with 11/16" body connects. There are two sizes of body connects. 11/16" and 7/8". When ordering...

Convert your current kegerator to be able to quickly switch out between Sanke and Cornelius style kegs. This set will allow you to switch from one style keg to another...

This is the 1/4" elbow that comes out of the back of the shank inside of a tower. Item # D1390 Weight 0.10 LBS

This nut holds the gray compression gasket on the gooseneck. Together, in harmony, all three form an assembly. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov   Item #...

Replacement stainless steel lever for Intertap draft faucets. Item # D1228 Weight 0.06 LBS

The KOMOS Cobra draft tower features a built-in glycol loop for chilling, making it a great option for commercial tap rooms or home bar enthusiasts looking for something really unique....

Foam on Beer Detectors, or FOBs, are commonly used in commercial draft systems as a way to eliminate product waste and increase profits. When a keg completely empties and foam...

Push product or sanitizer from one keg to the next. Two black, beverage quick disconnects with flare fittings attached via a one foot piece of beverage line. California Recipients: WARNING:...

Keg coupler for G-system (Anchor/Bass) kegs. Includes integrated washer/check valve and nut on the gas in side. Beer out fitting is standard beer thread (29/32 in - 14 thread) and...

We're excited to announce the coming release of the NUKATAP Stealth Bomber edition beer faucet. Be the first to receive your faucet by placing a pre-order today. We will automatically...

Made from 304 stainless steel. Item # D1734 Weight 0.03 LBS

Push product or sanitizer from one keg to the next. Two red, beverage quick disconnects with flare fittings attached via a one foot piece of beverage line. Ideal for transferring...